Engineered by Orthovana Medical Co., Ltd for optimal anatomical fit, rapid recovery, and reduced soft tissue irritation.
Our Hand and Wrist Plating Systems provide comprehensive solutions for metacarpal, phalangeal, and distal radius/ulna fracture management. Integrating both standard locking and 15° variable angle locking technologies, the portfolio features ultra-low-profile titanium plates (1.0mm to 1.3mm thickness) designed to preserve tendon sliding pathways.
Manufactured in ISO 13485-certified facilities from implant-grade Ti-6Al-4V ELI (ASTM F136) titanium alloy, every set is complemented by color-coded surgery-ready instrumentation for seamless intra-operative execution.
Minimizes soft-tissue impingement and extensor tendon friction in small hand structures.
Enables off-axis screw placement to target complex intra-articular fracture fragments.
High fatigue resistance, biocompatibility, and low MRI distortion compared to steel implants.
Color-coded drill bits and drivers matching 1.5mm, 2.0mm, and 2.4mm screw modules.
Complete modular implants matching specific anatomical zones and clinical indications.
Anatomically contoured volar plates designed for intra-articular and extra-articular distal radius fractures. Features combi-holes for fixed-angle locking or dynamic compression, with dual-angle distal screw trajectories to support the subchondral bone raft.
Comprehensive system for metacarpal and phalangeal fractures. Includes straight, T-plate, Y-plate, web-plate, and matrix configurations. Ultra-thin profile engineered for dorsal and lateral placement without compromising structural stability.
Designed for scaphoid fractures, carpal fusions, and intra-articular fragment fixation. Differential pitch thread design provides controlled inter-fragmentary compression while seating completely below the cartilage surface.
Orthovana Medical Co., Ltd adheres to rigid material standards and high-precision CNC manufacturing tolerances.
| System Module | Material Grade | Plate Thickness | Screw Diameters | Available Configurations |
|---|---|---|---|---|
| VA Distal Radius System | Ti-6Al-4V ELI (ASTM F136) | 1.2mm – 1.5mm | 2.4mm / 2.7mm | Volar Extra-articular, Volar Juxta-articular, Radial Styloid |
| Mini Fragment System (Hand) | Ti-6Al-4V ELI / CP Titanium | 1.0mm – 1.2mm | 1.5mm / 2.0mm / 2.4mm | Straight, T-Plates, Y-Plates, Condylar, Web-Plates |
| Headless Compression Screws | Ti-6Al-4V ELI (ASTM F136) | N/A (Recessed Screw) | 2.2mm / 2.5mm / 3.0mm | Short Thread, Long Thread, Fully Cannulated |
| Distal Ulna System | Ti-6Al-4V ELI (ASTM F136) | 1.1mm – 1.3mm | 2.0mm / 2.4mm | Hook Plates, L-Plates, T-Plates |
Why medical-grade titanium (Ti-6Al-4V ELI) is the superior standard for upper extremity trauma surgery.
Titanium exhibits superior biocompatibility and osteo-passivity. Stainless steel contains nickel alloys, which can induce hypersensitivity reactions in 10-15% of surgical patients. Titanium reduces systemic inflammatory response.
Titanium's elastic modulus (~114 GPa) is significantly closer to cortical bone than stainless steel (~200 GPa). This flexibility promotes mechanical strain transfer, accelerating callus formation and decreasing stress shielding bone loss.
Titanium implants generate significantly smaller MRI artifacts (3.7mm - 4.4mm at 1.5T/3T) compared to stainless steel (10.9mm - 15.3mm). Post-operative diagnostic imaging of soft tissues and joint surfaces remains clear and legible.
Technical and procurement inquiries addressed by our technical team.
A Hand Plating System consists of titanium plates and bone screws engineered to stabilize fractured bones in the hand and wrist during osseous healing. Internal fixation is indicated for displaced fractures, comminuted articular breaks, open fractures, and cases where external casting fails to maintain anatomical alignment.
Registered international distributors can request complete regulatory dossier packages, including ISO 13485 quality management certificates, CE compliance documents, raw material test certificates (ASTM F136 mill reports), Lot Traceability files, and Instructions for Use (IFUs).
Primary bone consolidation occurs between 6 to 8 weeks, with functional tissue recovery maturing over 3 to 6 months. Low-profile plates enable early controlled mobilization (starting within 3 to 7 days post-op), significantly reducing stiffness and joint adhesion risks.
Routine removal is not clinically required due to the excellent bio-inertness of Ti-6Al-4V titanium. Implants are designed for permanent residence unless hardware prominence, tendon irritation, or patient preference necessitates an outpatient removal procedure after bone consolidation (typically 12-24 months post-surgery).
Yes. We provide complete OEM and private-label contract manufacturing services, including custom laser marking, tailored tray configurations, customized packaging, and market registration assistance for global orthopaedic brand owners.